2022 Outdoor Grow Guide
(For the best grow of your life)
*Coming soon*​
Probiotic
Natural Farming
DIY Stealth Grow Setup With Built In SIP
LEARN - SHARE - GROW
Stealth Grow setup with build in SIP for easy watering!!
Ever wanted to Grow indoors but have limited space ?? Or want it stealthy so it's nearly undetectable ??
​
This setup combines the best of all worlds, for those who need a small easy to maintain setup that is stealthy and effective.
Supplies Needed:
1 Garbage Can - 2ft piece of Perforated pipe - 1 Airstone(Optional) - 1 Plastic tote Lid - 1 Solo Cup
​
4ft of PVC Pipe - 2 x Computer Fan - 1 x AC / DC Adaptor to run fans
STEP 1) Cut the Tote Lid
Using Scissors cut the tote lid round to the shape of the Garbage can bottom. You can use a measuring tape to measure the diameter to get an accurate measure. (Always overcut, you can always take more off)
​
Be sure to drill small aeration holes all over as shown and a large 3.5" hole in the middle for wicking.
STEP 2) Garbage Can Prep
Take your Scissors and cut the perferated pipe so that it fits snugly into the garbage can as shown below.
STEP 3) Add Fill Tube
Drill a hole large enough for your fill tube to fit through (Mine is 3/4" fill tube so I drilled a 1" hole)
Then place PVC pipe and elbows as sown so that it fills the reservoir section under the Soil mass.
STEP 4) Add Airstone and Plastic Platter to Can
First drill a hole for your air line and then run that in. Add the Plastic Platter (Cut from the tote lid)
​
Then take the Solo Cup and cut slits all around it's sides with a knife then add to the center for wicking.
STEP 5) Add Computer Fans
First Drill or cut out the spaces for your computer fans to fit, then strategically place the INTAKE below the canopy and the OUTTAKE above thus circulating the air through the canopy to prevent molds or mildews.
<-- Fan Below Canopy
Fan Above Canopy
<--
<-- AC / DC adaptor
STEP 6) Add LED to Top and Panda to inside of can
First take the Lid and add an LED to it by drilling small holes and allowing the straps to connect through them. Then Add panda Plastic to the inside or spray paint it white for reflective purposes.
STEP 7) Add Living Soil to the base and Peat / Coco for Wicking
First take peat and Coco and mix 50/50 and add to the wicking point. Then add the Living Soil to the top of the platter. Add plants and start flowering.
